In addition to the information you see on this page ~ at the bottom of this page, you will find a link to the
Everbrite™ Home Page, with TONS of information, and many before and after photographs that show what
this AWESOME coating can do...

PLEASE NOTE that anything you see in the after photographs on the Everbrite™ Website are typical, and we
can achieve the same kinds of results on a surface that you want or need coated.

We are Contractors (Authorized and Certified by Everbrite™) who professionally use and apply the Everbrite™
line of products. We are NOT retailers of the Everbrite™ products, as their products are available ONLY through
the Manufacturer, and not from any other source. If you will use the link at the bottom of this page, it will take
you to the Everbrite™ Website, where you can order the products online, and have them shipped directly to you.

Please note that for anything you see offered here - if we CANNOT do as advertised, and as we claim we can do –
YOU WILL OWE US NOTHING AT ALL FOR OUR SERVICES!

Also, please see the link at the bottom of this page to learn more about Everbrite™ and the Company behind it.

Everbrite™ is a crystal clear coating that will provide years of protection against chemical and ultraviolet corrosion on most
metal (and many other types of) surfaces, and will restore / rejuvenate the “as new” appearance to most faded / oxidized
painted surfaces, bringing them back to a “looking like new” condition WITHOUT having to repaint. It will do all of this at
a fraction of the cost of that traditional repaint. No (re)finish will ever be as good as the original factory baked-on finish, so
WHY repaint it if you can "SAVE" that original finish without all of the negative issues that come with repainting a surface(?),
after which it will eventually LOOK like it has been repainted, and more often than not, that might not be something to be
so happy about...

Everbrite™ will not only rejuvenate and restore color to faded/oxidized surfaces to a “like new" condition, it will also protect
already nice surfaces and keep them JUST as they look now for YEARS! After it has cured, Everbrite™ is easy to clean
and maintain. It will not yellow, fade, crack, peel, or chip. Everbrite™ protects from environmental and other contamination,
oxidation, salt air, it won’t rust, most contamination will not even stick, and what does will clean off easily. Everbrite™ is
corrosion resistant, weather resistant, impact resistant, non-conductive, and static free (to prevent harmful electrolysis).
A nice rain will often do for an Everbrite™ coated surface what a washing will do for the same surface if it were not coated.

In MOST cases, whether you are using Everbrite™ to restore the finish on your surface, or even just to protect it, the very
presence of Everbrite™ should increase the appraisal value of whatever has been coated by MORE than it costs to have
this coating applied in the first place!

Everbrite™ works very well on almost any kind of metal, vinyl or aluminum building and roof surfaces / Motor Homes /
RV’s / Travel Trailers / Buses / OTR Tractor Trailers / equipment / green utility boxes / ANY kind of A/C units (used outside
it restores and protects the exterior finish, used INSIDE it protects from corrosion without affecting heat transfer) / auto
restoration and "Hot Rodders" - what about your chrome, and nice wheels, clear lenses and air deflectors ? / Vinyl siding /
horse trailers / Stainless Steel (kitchen safe, and will even resist most fingerprints) / window mullions and the framework
around doors and windows / mailboxes / shutters and other plastic and similiar surfaces - YOU NAME IT!!!

Our SPECIALTIES for the Everbrite™ coating process are Self-Storage complexes (roll-up doors, etc.), metal
buildings, window and door frames, garage doors, signs, and what I like to call "rolling stock", which is almost
anything with wheels, including RV's, Motorhomes, Campers, Airstream Trailers, etc.

We are taught that very few repaints will ever look, bond, or last like the original factory baked-on finish.
Why repaint over that original finish if it can be SAVED so that no repainting is even necessary?

You will always have issues with repainting - first you have to choose the right material to repaint with, then you have
to make sure the color will match and blend (if you are not doing a total repaint), also making sure that it will bond,
that it will last, and even then it can fade at a different rate than the original paint does if you do not paint the entire
surface. Even with all of that done correctly, you still have other issues with repainting - the spills, splats, splotches,
and the overspray. Where applicable, THIS Everbrite™ coating is an affordable 100% solution to ALL OF THESE
PROBLEMS AND ISSUES!!!!!!

If I apply the very same Everbrite™ coating to something that already has a new fresh look to it, one that currently does
NOT need repainting, it will look even better, and again, it might not need repainting in the future. Once you do apply
this to restore or protect a surface, all you might need to do in the future is to recoat with Everbrite™ (when it eventually
does need it). The surface will also be protected, and will be very easy to maintain and keep clean.

There are not many people in this area who do this professionally, and finding someone who does apply the Everbrite™
coating as a professional can be difficult. Proper preparation of the surface to be coated is EXTREMELY critical, and
makes all the difference in having nice results. This process can be labor intensive, and the material is somewhat
expensive to purchase, but our services in applying this material for you are still priced fairly. The results of this process,
when applied to YOUR surface (when done properly and carefully by us) will be very impressive. I can sincerely promise
you that!

When I do this coating process for a customer, after correctly cleaning and prepping, there are several options as to
how to apply Everbrite™, depending on the surface being coated. In many cases I prefer to apply it using a quality HVLP
sprayer. Since there will be no overspray, there are no obvious signs of repaint or color restoration ever having been
done, just a nice, shiny, hard, durable, clearcoat finish that will last for years.

If I cannot do what an average person would consider to be VERY nice work, getting those kinds of results
(similar to what you see in before/after photos in the websites or sales information), well, then I don’t even
charge for work that isn’t satisfactory to you, with results that make a dramatic difference in the appearance
(between the before and after look and photo’s) to a reasonable person.

Please follow the link at the bottom of this page to the Everbrite™ website where you will find photographs that accurately
show what this awesome coating can do, as well as showing other uses for this material. There are several of these similar
materials available (and I have used some of them professionally), but please let me show you (and explain why) that this
one is the very best of these coatings that I am aware of.

I will be happy to email you another photo that says an awful lot just by itself.

Again, if this coating does not do as I claim it will, I will charge NOTHING AT ALL for our services!

Contaminations, bugs (Florida Love Bugs), tar, road hazards, oil, grease, grime, and other kinds of residue from
hydrocarbons will normally not stick to a surface that has been coated with this material.

What about uses for Everbrite™ elsewhere on your property (including roll-up garage doors, signage, window and door
frames, and SO MANY other uses)? Not only will that surface look nicer, and consider the extra value that will be added
to whatever the surface is, where the color is now restored and protected?

If you are interested, or even intrigued, please contact me so we can discuss this further. I can show you several
different surfaces with faded color to which I have applied a sample of this coating so you can see AND FEEL the
same surface (before and after) for yourself, after which if my coating and I cannot do what I claim, you pay me
nothing at all…

We are MOBILE as we offer these services. We are based in Metro Atlanta, Ga. and will perform this coating service
almost anywhere in Georgia and surrounding States, with travelling farther still being an option. IN ADDITION – if you are
a business who is interested in this coating service we will definitely be willing to travel to YOUR location to perform this
service if there is enough work to warrant our doing it and being profitable (within reason) to do so.

Interested??? Isn't it about time YOU call us for an appointment to show you how good this product really is?

Please ask to see our booklet that shows MANY before / after photos of our work, or ask us for the video that shows the
application process, and the final results!

For more information –

HMSCoatings(.com) / Patrick / (404) 218-0915 (cell/vm)

This link contains our service offerings to the Self - Storage Warehouse Industry. If you own
or manage one of these facilities, please see this information ~
(Information for the Self-Storage Industry)
 

Here is a link to the Everbrite™ website, where you can find more information,
as well as order products for yourself ~ www.everbritecoatings.com/   


Please use this link to go to our HOME PAGE to see our contact information.